Custom Widgets

This is a PCB designed for the SiMON6800 Monitor project. This project allows you to revive programming from the late 1970s where Motorola 6800s were the latest thing. You can

5-way directional buttons are very useful, but not easy to mount in a home electronics project. This PCB simplifies the use of those directional buttons, by offering a correctly spaced,

These adapter PCBs are to enable the mounting of those little 6mm tactile buttons, e.g. for use on a front panel. The PCBs present a standard 0.1″ / 2.54mm connections

This PCB enables the mounting of a discrete USB Mini (mini-USB) connector which are usually quite tricky to mount and solder, especially on a standard breadboard-sized matrix. This PCB converts

The PCB offers a simple and effective way to mount a 10-segment LED Bargraph Display having 20 pins. It can be used to configure a 10-segment LED as either a

These two different adapters PCB are intended to convert the RFM69 Module’s castellated solder pads (which are a 2mm spacing) to fit a more standard 0.1″ 2.54mm PCB spacing of